Mori Seiki NT-4300 DCG 1000 SX 2009

machine specification

• MAX SWING (INCHES)
• 28.74"

• BAR STOCK CAPACITY
• 3.34"

• UPPER SWING CROSS SLIDE
• 28.74” (Turret 2 15.74”)

• SPINDLE HEAD SURFACE DISTANCE
• 53.03”

• MAX TURNING DIAMETER
• Tool spindle- Capto C6 25.98” Turret 2 13.77”

• MAX TURNING LENGTH
• 38.70”

• X-AXIS (TOOL SPINDLE)
• 29.52”

• Y-AXIS (TOOL SPINDLE)
• 8.26”

• Z-AXIS (TOOL SPINDLE)
• 44.09” + 3.93” (ATC travel capacity)

• B-AXIS (TOOL SPINDLE)
• 120 degrees

• X-AXIS TRAVEL (TURRET 2)
• 7.67”

• Z-AXIS TRAVEL (TURRET 2)
• 39.76”

• MAX SPINDLE SPEED ROTATIONS
• 3000 min-1

• SPINDLE SHIFT RANGE
• 2 steps (winding switching)

• SPINDLE END SHAPES
• JIS A2-8

• DIAMETER OF THE THROUGH HOLE
• 4.13”

• SPINDLE SMALL INDEXING ANGLE
• .0001 degree

• SPINDLE BEARING INNER DIAMETER
• 6.29”

• SPINDLE TORQUE (30MIN./CONTINUOUS)
• 1,000/841

• ATTACHABLE TOOL
• 1 pc.

• B AXIS INDEX TIME
• .4/90 degrees

• B AXIS SMALL INDEXING ANGLE
• .0001 degree

• TOOL SPINDLE MAX ROTATION SPEED
• 12,000 min-1

• TOOL SPINDLE TAPER HOLE
• Capto C6

• TOOL SPINDLE BEARING INNER DIAMETER
• 2.75”

• STORED TOOL
• 40 pcs.

• MAX TOOL DIAMETER (WITH NEIGHBORING TOOL)
• 2.75”

• MAX TOOL DIAMETER (WITHOUT NEIGHBORING TOOL)
• 5.51”

• MAX TOOL LENGTH
• 15.74”

• MAX TOOL WEIGHT
• 17.63 lbs.

• TOOL CHANGING TIME
• 1.25 sec.

• SPINDLE TORQUE
• 120/44 n.m

• ATTACHABLE TOOL
• 10 pcs

• TURRET INDEXING TIME
• .28 sec

• SHANK PART OF SQUARE BITE HEIGHT
• .98"

• SHANK PART OF BORING BAR DIAMETER
• 2.36”

• RAPID FEED SPEED - TOOL SPINDLE
• X:164’, Y:98.42’, Z:164’

• RAPID FEED SPEED - TURRET 2
• X2: 98.42’, Z2: 98.42

• RAPID FEED SPEED - SPINDLE 2
• A: 98.42'

• COOLANT TANK CAPACITY
• 141.86 gal.

machine equipped with

• DRY ANCHOR
• CHIP CONVEYOR (OUTSIDE OF MACHINE):HINGE TYPE (RIGHT)
• AIRBLOW SYSTEM : CHUCK (SPINDLE 1)
• AIRBLOW SYSTEM : BRADE AIRBLOW (TOOL SPINDLE)
• COOLANT GUN
• MIST COLLECTOR(HVS-220• AKAMATSU DENKI)
• COOLANT FLOAT SWITCH
• COOLANT COOLER SYSTEM
• UPPER SPINDLE 1 CHUCK COOLANT SYSTEM
• UPPER SPINDLE 2 CHUCK COOLANT SYSTEM
• SPINDLE 2 TAIL STOCK
• AUTO TOOL PRE-SETTER INSIDE MACHINE
• MEASUREMENT SYSTEM INSIDE MACHINE:TOOL SPINDLE (MODEL:MP700)
• AUTO DOOR
• MANUAL PULSE HANDLE: SEPARATE PLACEMENT
• TRAVELING TYPE PART CATCHER:RECEIVER
• CONVAYOR FOR WORK MOVEMENT
• OUTSIDE MCODE OUTPUT : 1OPES
• DIRECT SCALE FEED BACK:X/Y/Z (TOOL SPINDLE)
• SIGNAL TOWER:3STEP (RED/YELLOW/GREEN)
• LEAKAGE OF ELECTRICITY BREAKER
• WORK COUNTER
• POWER RECEPTACLE FOR CONTROL PANEL AC100V
• DENGER SENSING SYSTEM 1/F
• SPECIFIED COLOR:MUNSELL 7.5BG7/2(SMOOTH)
• TAILSTOCK