O-M VTLEX 1600M 2009

machine specification

• TABLE DIAMETER
• 63" (4-Jaw Independent)

• RAPID TRAVERSE RATE Z
• 393 IPM

• RAPID TRAVERSE RATE X
• 551 IPM

• TABLE SPEED: HIGH
• 6.7 - 320 Rpm

• TABLE SPEED: LOW
• 1.6 - 76.9 Rpm

• TABLE SPEEDS (INFINITELY VARIABLE)
• 2 X

• PULL STUD
• P50-T-Ii

• TURNING TOOL SHANK SIZE
• 1/1/4" X 1-1/4"

• RAM SIZE
• 8-1/4" X 8-1/4"

• MAX. TABLE TORQUE
• 14,750 Lb. Ft.

• DRILL DIAMETER
• 3-1/8"

• MAX CUTTING FORCE
• 6,744 Lbf.

• MAX TABLE LOAD
• 22,000 Lb.

• WORK HEIGHT
• 63"

• MAX SWING
• 78"

• MAX TURNING DIAMETER
• 78"

• NUMBER OF PALLETS
• 2

• X AXIS TO RIGHT FROM TABLE CENTER
• 69-5/8"

• X AXIS TO LEFT FROM TABLE CENTER
• 35-7/16"

• Z AXIS VERTICAL TRAVEL
• 35-1/2"

• MINIMUM HOLE DIAMETER ALLOWING RAM PASSAGE
• 13"

• TAPER OF MILLING SPINDLE NOSE:
• No. 50 (Big Plus)

• MANUAL FEED RATE X AND Z
• 141 IPM

• CUTTING FEED PER REV
• .0004 - 20 Inch

• ELEVATING SPEED OF CROSS RAIL
• 14 IPM

• TABLE INDEXING SPEED
• 3 Rpm

• MANUAL FEED RATE (C AXIS)
• 0 - 800 Deg/Min

• DRIVE MOTOR FOR TURNING
• 60 / 75 Hp

• MILLING SPINDLE MOTOR
• 20 / 25 Hp

• AXIS FEED MOTOR (X / Y / C)
• Servo - 5.6 Hp

• ATC MAGAZINE MOTOR
• Servo - 1 Hp

• CROSS RAIL ELEVATING MOTOR
• 7.5 Hp

• TOOL SELECTION
• Fixed Address, Shortest Path Random

• NO. OF TOOLS STORED
• 24 (Turning Or Milling)

• MAX. LENTH OF TOOL HOLDER FROM MOUNTING FACE
• 35-1/4"

• MAX. WEIGHT OF TOOL HOLDER PER PIECE
• 110 Lb. / 1pce.

• MAX. WEIGHT OF MILLING TOOL
• 55 Lb / 1pce.

• MAX. MILLING TOOL DIAMETER
• 5-7/8" - With Other Tools Adjoining

• MAX. MILLING TOOL DIAMETER
• 9-7/8" - With No Tools Adjoining

• X AXIS POSITIONING
• .0003" For 20"

• Z AXIS POSITIONING
• .0003" For 20"

• C AXIS POSITIONING
• +/- 25 Seconds (Unidirectional Positioning)

• REPEATABILITY (X/Z)
• .0002"

• C AXIS REPEATABILITY
• +/- 10 Seconds

machine equipped with

• FANUC SERIES 18I-TB CNC CONTROL
• (2) 4-JAW BUILT-IN CHUCKS
• C AXIS MILLING FUNCTION
• C AXIS TABLE INDEXING
• 24 POS. TOOL CHANGER
• HIGH-PRESSURE COOLANT THROUGH SPINDLE
• FLOOD COOLANT THROUGH RAM
• CHIP CONVEYOR
• AUTOMATIC TOOL-TIP MEASURING OFFSET SYSTEM
• HIGH-PRESSURE COOLANT THROUGH THE SPINDLE
• CHIP BLASTER
• OPERATOR PLATFORM
• VIDMAR CABINETS WITH TOOLING AND SET UP ACCESSORIES
• VARIOUS TOP JAWS AND RISERS
• MISC. TURNING AND BORING HOLDERS
• MISC. 50 TAPER MILL
• DRILL TAP COLLET TYPE LIVE TOOLS