Hines 300NC 2016

machine specification

• TURRET CAPACITY
• 8 Positions

• TOOL CHANGER TYPE
• 60 ATC

• THROAT DEPTH
• 9.45"

• TABLE SIZE - W
• 30"

• TABLE SIZE - L
• 61"

• PALLET SIZE (INCHES)
• 25"

• BAR STOCK CAPACITY
• 2.0"

• MAX SWING (INCHES)
• 17.32"

• SPINDLE MOTOR (HP)
• 20 HP

• SPINDLE SPEED
• 12,000 RPM

• SPINDLE TAPER (CAT/BT)
• HSK-463

• Z - AXIS TRAVEL (INCHES)
• 14.7" / 375mm

• Y - AXIS TRAVEL (INCHES)
• 15.7" / 400mm

• X - AXIS TRAVEL (INCHES)
• 15.7" / 400mm

• CHUCK SIZE (INCHES)
• 8"

• MEMORY CAPACITY
• 100 job storage, 6 bends per part

• CAPACITY
• 4? OD x .226 Wall

• STANDARD MAXIMUM RADIUS
• 18"

• MAXIMUM BEND ANGLE
• 190 degrees

• BEND ANGLE ACCURACY (+ / -)
• 0.1 degree

• BEND ARM SPEED
• 3.5 RPM

• MAXIMUM TUBE LENGTH OVER MANDREL
• 10'

• OPERATING PRESSURE
• 2000 psi

• RESERVOIR CAPACITY
• 150 gal.

• VOLTAGE
• 220/440/3 Phase/60Hz (50 Hz Optional)

machine equipped with

• PRESSURE DIE HOLDER
• WIPER DIE HOLDER
• OVERHEAD TIE BAR (ELIMINATES DIE DEFLECTION)
• FOOT PEDAL OPERATION
• PRESSURE DIE ASSIST
• PRESSURE DIE ASSIST REAR SUPPORT ROLLER
• MANDREL ROD SAE THREAD SUPPLIED (1)
• MANDREL LUBRICATOR
• MANDREL EXTRACTOR
• MANDREL EARLY OUT PROGRAMMABLE
• PLC CONTROLLER – MITSUBISHI FX2N
• TOUCH SCREEN (PROFACE AMERICA)
• TUBE PIECE COUNTER
• CLOCKWISE ROTATION
• DUAL STAGE PUMP HYDRAULIC SYSTEM