Hurco BMC 30 SSM 1996

machine specification

• X - AXIS TRAVEL (INCHES)
• 15.7" / 400mm

• Y - AXIS TRAVEL (INCHES)
• 15.7" / 400mm

• Z - AXIS TRAVEL (INCHES)
• 14.7" / 375mm

• SPINDLE SPEED
• 12,000 RPM

• SPINDLE MOTOR (HP)
• 10 HP

• SPINDLE MOTOR TYPE
• Dual Wound

• SPINDLE TYPE
• Cartridge #40; Taper

• DISTANCE FROM SPINDLE NOSE TO TABLE
• 6" - 30"

• DISTANCE FROM SPINDLE CENTER TO COLUMN
• 17.5"

• TABLE SIZE - L
• 61"

• TABLE SIZE - W
• 30"

• TABLE LOAD WITH UNIFORM DISTRIBUTION
• 1100 lbs.

• T-SLOT SIZE
• .71"

• NO. OF T-SLOTS
• 3

• TOOL HOLDER
• CAT-40 V-Flange

• MAXIMUM TOOL DIAMETER
• 3.9"

• MAXIMUM TOOL LENGTH
• 12"

• MAXIMUM TOOL WEIGHT
• 15 lbs.

• CHANGE TIME TOOL TO TOOL
• 7 seconds

• CHANGE TIME CHIP TO CHIP
• 9 seconds

• MAXIMUM RAPID TRAVEL - X/Y AXIS
• 945"/min.

• MAXIMUM RAPID TRAVEL - Z AXIS
• 590"/min.

• MAXIMUM THRUST RATING - X/Y AXIS
• 1500 lbs.

• MAXIMUM THRUST RATING - Z AXIS
• 2415 lbs.

• BEARINGS
• ABEC-7 Class Angular Contact

• BEARING LUBRICATION
• Grease Packed

• TORQUE (30 MINUTES)
• 105 lb/ft at 500 rpm

• NUMBER OF STATIONS
• 24

• ORIENTATION
• Electronic

• VOLTAGE
• 240 V

• BAR STOCK CAPACITY
• 2.0"

• CHUCK SIZE (INCHES)
• 8"

• SPINDLE TAPER (CAT/BT)
• HSK-463

• MAX SWING (INCHES)
• 17.32"

• THROAT DEPTH
• 9.45"

• TOOL CHANGER TYPE
• 60 ATC

• TURRET CAPACITY
• 8 Positions

• PALLET SIZE (INCHES)
• 25"

machine equipped with

• AVAILABLE MANUALS

machine description