Hurco HTX-500 2011

machine specification

• TURRET CAPACITY
• 8 Positions

• TOOL CHANGER TYPE
• 60 ATC

• THROAT DEPTH
• 9.45"

• TABLE SIZE - W
• 30"

• TABLE SIZE - L
• 61"

• PALLET SIZE (INCHES)
• 25"

• BAR STOCK CAPACITY
• 2.0"

• MAX SWING (INCHES)
• 17.32"

• CHUCK SIZE (INCHES)
• 8"

• X - AXIS TRAVEL (INCHES)
• 15.7" / 400mm

• Y - AXIS TRAVEL (INCHES)
• 15.7" / 400mm

• Z - AXIS TRAVEL (INCHES)
• 14.7" / 375mm

• PALLET WORKING SURFACE (2)
• 500mm x 500mm

• MAXIMUM TABLE LOAD
• 1,100 lbs per pallet

• SPINDLE SPEED
• 12,000 RPM

• SPINDLE MOTOR (HP)
• 24 HP

• SPINDLE TAPER (CAT/BT)
• HSK-463

• SPINDLE NOSE TO TABLE
• 6.1” to 30.12”

• B AXIS MOTION
• 360 Degrees

• COOLANT CAPACITY
• 153 Gallons

• B AXIS FEEDRATE
• 33.3 RPM

• B AXIS CLAMPING FORCE (4 CONE CLAMP SYSTEM)
• 10,000 lbs

• B AXIS CLAMPING FORCE ( ROTATIONAL )
• 1,100 lbs

• PALLET TOP
• (24) - M16 Hole Matrix on 3.94” Centers

• SPINDLE MOTOR TORQUE (1 MIN.)
• 175 Ft. lbs @ 720 RPM

• RAPID TRAVERSE RATE X,Y AND Z
• 1,260 ipm

• CUTTING FEED RATE
• 600 ipm

• LEAST COMMAND INCREMENT
• 0.0001”

• POSITIONING ACCURACY X,Y/ Z
• -/+ 0.0002”

• REPEATABILITY X,Y/Z
• -/+ 0.0001”

• PALLET EXCHANGE TIME
• 8 Seconds

• POSITIONING ACCURACY B AXIS
• 8 Arc-seconds

• REPEATABILITY ACCURACY B AXIS
• +/- 2 Arc-seconds

• NUMBER OF STATIONS
• 60 / CAT 40

• TOOL TO TOOL ATC TIME
• 2.5 Seconds

• TOOL CHANGER TYPE
• Electronic

• MAXIMUM TOOL DIAMETER
• 3.2”

• MAXIMUM TOOL LENGTH
• 13.8”

• VOLTAGE REQUIRED
• 208-240 VAC / 60Hz

• POWER RATING
• 60 KVA

• AIR REQUIREMENTS
• 5 CFM @ 80-100 psi