Hurco VM10i 2013

machine specification

• TURRET CAPACITY
• 8 Positions

• THROAT DEPTH
• 9.45"

• PALLET SIZE (INCHES)
• 25"

• BAR STOCK CAPACITY
• 2.0"

• MAX SWING (INCHES)
• 17.32"

• CHUCK SIZE (INCHES)
• 8"

• X - AXIS TRAVEL (INCHES)
• 15.7" / 400mm

• Y - AXIS TRAVEL (INCHES)
• 15.7" / 400mm

• Z - AXIS TRAVEL (INCHES)
• 14.7" / 375mm

• SPINDLE SPEED
• 12,000 RPM

• SPINDLE MOTOR (HP)
• 15 HP

• SPINDLE TAPER (CAT/BT)
• HSK-463

• SPINDLE TORQUE
• 74 Nm @ 1,450 RPM (1 Min.)

• SPINDLE NOSE TO TABLE
• 4.02” – 24.02”

• TABLE SIZE - L
• 61"

• TABLE SIZE - W
• 30"

• MAXIMUM LOAD
• 749.6 lbs.

• TABLE T-SLOTS
• .12” x .71” x 3.9

• TOOL CHANGER TYPE
• 60 ATC

• RAPID TRAVERSE X/Y/Z
• 78.84’/min.

• CUTTING FEED RATES X/Y/X
• 49.87’/min.

• POSITIONING ACCURACY
• .010 mm.

• REPEATABILITY
• .005 mm.

• MAXIMUM TOOL LENGTH
• 9.84”

• MAXIMUM TOOL WEIGHT
• 15.4 pounds

• TOOL CHANGE TIME
• 3 seconds

machine equipped with

• 2 GB RAM
• 64 GB HARD DRIVE
• AUTO INTERRUPT CYCLE
• CHIP AUGER
• METAL TELESCOPIC WAY COVERS
• AUTOMATIC CENTRAL LUBRICATION SYSTEM
• POWER CABINET HEAT EXCHANGER
• DIRECT DRIVE Z AXIS; NO COUNTERBALANCE
• RIGHT SIDE LED WORK LIGHT
• DOUBLE NUT BALL SCREWS
• SOLID CAST IRON FRAME
• AIR PURGED CARTRIDGE SPINDLE DESIGN
• FLOOD COOLANT ASSEMBLY
• RS 232 & RJ 45 PORTS FOR DNC
• USB PORT
• TRANSFORMER
• ULTIMONITOR FUNCTION
• AVAILABLE MANUALS
• 9" VICE
• ULTIMOTION SOFTWARE (ENABLING UP TO 10K BLOCKS LOOK AHEAD)
• RIGID TAP