Mazak Integrex 100-2SY 2004

machine specification

• TURRET CAPACITY
• 8 Positions

• THROAT DEPTH
• 9.45"

• TABLE SIZE - W
• 30"

• TABLE SIZE - L
• 61"

• PALLET SIZE (INCHES)
• 25"

• SPINDLE TAPER (CAT/BT)
• HSK-463

• CHUCK SIZE (INCHES)
• 8"

• MAX SWING (INCHES)
• 17.32"

• MAX SWING OVER CARRIAGE
• 11.42"

• MAXIMUM CUTTING DIAMETER
• 18.5"

• MAXIMUM CUTTING LENGTH
• 29.72"

• X - AXIS TRAVEL (INCHES)
• 15.7" / 400mm

• Y - AXIS TRAVEL (INCHES)
• 15.7" / 400mm

• Z - AXIS TRAVEL (INCHES)
• 14.7" / 375mm

• TRAVEL B AXIS
• 225 Deg/.001 Deg

• SPINDLE NOSE
• A2-5

• SPINDLE BORE
• 2.4"

• BAR STOCK CAPACITY
• 2.0"

• SPINDLE SPEED
• 12,000 RPM

• SPINDLE MOTOR (HP)
• 10 HP

• MAIN & SUBSPINDLE INDEXING
• .001 Degree

• ROTARY TOOL MOTOR
• 7.5 HP

• ROTARY TOOL SPEED
• 10,000 RPM

• TOOL CHANGER TYPE
• 60 ATC

• RAPID TRAVERSE RATE X
• 1181 IPM

• RAPID TRAVERSE RATE Y
• 1024 IPM

• RAPID TRAVERSE RATE Z
• 1299 Ipm

machine equipped with

• EIA/ISO PROGRAMMING
• 213 PSI FLOOD/THRU NOT SIMUL-FLOWABLE
• 2ND SPINDLE C-AXIS .001 DEGREE
• AUTO CHUCK JAWS OPEN/CLOSE 1ST AND 2ND SPINDLE
• CHUCK OPEN/CLOSE CONFIRMATION 1ST AND 2ND SPINDLE
• HYDRAULIC PRESSURE INTERLOCK
• MILLING SPINDLE SYNCHRONOUS TAPPING
• 6" CHUCK BB-06 FOR DIAMETER 2" BAR CAPACITY 1ST SPINDLE
• 6" CHUCK NON THRU HOLE ON SUB
• AUTOMATIC PARTS CATCHER
• TURRET AIRBLAST
• CHIP CONVEYOR - REAR EXIT
• PREP FOR MULTI AND FLASH SYSTEM
• ATS A-5 3J COLLET MAIN SPINDLE
• PARTS EJECTOR FOR 2ND SPINDLE COLLET NOSE
• 30+ KM63 TOOL HOLDERS