Mori Seiki DMG NTX2000/1500SZM 2016

machine specification

• TURRET CAPACITY
• 8 Positions

• TOOL CHANGER TYPE
• 60 ATC

• THROAT DEPTH
• 9.45"

• TABLE SIZE - W
• 30"

• TABLE SIZE - L
• 61"

• PALLET SIZE (INCHES)
• 25"

• BAR STOCK CAPACITY
• 2.0"

• MAX SWING (INCHES)
• 17.32"

• SPINDLE SPEED
• 12,000 RPM

• SPINDLE TAPER (CAT/BT)
• HSK-463

• Z - AXIS TRAVEL (INCHES)
• 14.7" / 375mm

• Y - AXIS TRAVEL (INCHES)
• 15.7" / 400mm

• X - AXIS TRAVEL (INCHES)
• 15.7" / 400mm

• CHUCK SIZE (INCHES)
• 8"

• MAXIMUM WORKPIECE SWING
• 25.9"

• SWING OVER CROSS SLIDE, STANDARD
• 25.9"

• SWING OVER CROSS SLIDE, TURRET 2
• 11.8"

• MAXIMUM TURNING DIAMETER, STANDARD
• 24.0"

• B-AXIS 90 DEG
• 25.9"

• MAXIMUM TURNING DIAMETER, TURRET 2
• 10.7"

• MAXIMUM TURNING LENGTH
• 60.6"

• BAR WORK CAPACITY
• 2.5"

• FOR 3.1" BAR WORK CAPACITY SPECIFICATIONS
• 3.1"

• X TRAVEL
• 19.5"

• Y TRAVEL
• 4.9"

• Z TRAVEL
• 61.4"

• B TRAVEL
• 120 Deg.

• X2 TRAVEL
• 6.3"

• Z2 TRAVEL
• 55.2"

• SPINDLE 1, SPEED
• 5,000 RPm

• SPINDLE 1, NOSE
• A2-6

• SPINDLE 1, THROUGH-SPINDLE HOLE DIAMETER
• 2.9

• SPINDLE 1, MINIMUM SPINDLE INDEXING INCREMENT
• 0.0001 Deg.

• SPINDLE 1, SPINDLE TORQUE - HIGH-TORQUE (FT-LBF)
• (264.0/170.4/157.8)

• SPINDLE 2, SPEED
• 5,000 RPM

• SPINDLE 2, NOSE
• A2-6

• SPINDLE 2, THROUGH-SPINDLE HOLE DIAMETER
• 2.9"

• SPINDLE 2, MINIMUM SPINDLE INDEXING INCREMENT
• 0.0001 Deg.

• TURRET 1, NUMBER OF TOOL STATIONS
• 1

• TURRET 1, MINIMUM B-AXIS INDEXING INCREMENT
• 0.0001 Deg.

• TURRET 1, MAXIMUM TOOL SPINDLE SPEED
• 12,000 RPM

• TURRET 1, TAPER HOLE OF ROTARY TOOL SPINDLE
• Capto C6

• TURRET 1, TOOL STORAGE CAPACITY
• 76 ATC

• TURRET 1, TOOL CHANGING TIME (TOOL-TO-TOOL)
• 1.25 sec.

• TURRET 2, NUMBER OF TOOL STATIONS
• 10

• TURRET 2, TURRET INDEXING TIME
• .19 sec.

• TURRET 2, MAX. ROTARY TOOL SPINDLE SPEED MIN-1
• 6,000

• TURRET 2, SPINDLE TORQUE (FT·LBF
• 3.5/1.7

• SPINDLE 1 DRIVE MOTOR 30 MIN/CONT (HP)
• 30/24.7

• SPINDLE 2 DRIVE MOTOR 30 MIN/CONT
• 30/24.7

• TOOL SPINDLE DRIVE MOTOR 10 MIN/CONT
• 24.7/15

• TURRET 2 ROTARY TOOL SPINDLE DRIVE MOTOR (HP
• 2/1.6

• TOOL STORAGE CAPACITY
• 76 Tools 34,826 lb.

seller's comments

Machine has 0 hours and has never been installed. Warranty will transfer to buyer!

machine equipped with

• MACHINE HAS 0 HOURS
• WARRANTY WILL TRANSFER TO BUYER
• MORI F31IB5 CONTROL W/ CELOS
• HIGH TORQUE SPINDLES ON BOTH
• (2) 8" CHUCKS
• 76 AUTOMATIC TOOL CHANGER
• CHIP CONVEYOR
• SUPER-HIGH-PRESSURE COOLANT INTERFACE
• RENISHAW MP700 WORKPIECE MEASURING SENSOR
• WORKPIECE UNLOADER
• SIGNAL LIGHT
• SPINDLE 2 WORKPIECE EJECTOR
• BARFEED INTERFACE (LNS)
• MANUAL PULSE GENERATOR
• 4MB PROGRAM STORAGE
• SPINDLE 1 HOBBING FUNCTION NO TOOL HOLDERS OR LIVE TOOLS OF ANY KIND ARE COMING WITH THIS MACHINE.