DMG Mori NZX 2500 2015

machine specification

• TURRET 1
• 12-station

• COOLANT TANK CAPACITY
• 105.6 gal.

• TAILSTOCK SPINDLE TRAVEL
• 150 mm (5.9”)

• TAILSTOCK SPINDLE DIAMETER
• 100mm (4.3”)

• TAILSTOCK TRAVEL
• 600mm (23.6”)

• JOG FEEDRATE
• 196.9 IPM <20 steps>

• Z1 AXIS
• 30,000 mm/min (1,181.1 IPM)

• X2 AXIS
• 25,000 mm/min (984.3 IPM)

• X1 AXIS
• 25,000 mm/min (984.3 IPM)

• TURRET INDEXING TIME
• 0.2 sec

• SHANK DIAMETER FOR BORING BAR
• 50mm (2.0”)

• SHANK HEIGHT FOR SQUARE TOOL
• 25 mm (1.0”)

• TURRET 2
• 8-station

• SWING OVER BED
• 780 mm (30.7”)

• NUMBER OF TOOL SLIDES
• 2

• CHUCK
• 10" hollow

• SPINDLE BEARING INNER DIAMETER
• 120 mm (4.7")

• THROUGH SPINDLE HOLE DIAMETER
• 73mm (2.9")

• SPINDLE NOSE
• A2-6

• MAX SPINDLE SPEED
• 5,000 RPM

• Z-AXIS TRAVEL (TURRET 2)
• 650 mm (25.6”)

• Z-AXIS TRAVEL (TURRET 1)
• 650 mm (25.6”)

• X-AXIS TRAVEL (TURRET 2)
• 170 mm (6.7")

• X-AXIS TRAVEL (TURRET 1)
• 225 mm (8.9”)

• MAX TURNING LENGTH
• 600mm (23.6)”

• MAX. TURNING DIAMETER TURRET 1
• 370 mm(14.5”)

• MAX. TURNING DIAMETER TURRET 2
• 260 mm (10.2")

• Z2-AXIS
• 30,000 mm/min (1,181.1 IPM)

• BUILT-IN CENTER
• MT4

machine equipped with

• 5000 RPM SPINDLE
• THROUGH-SPINDLE HOLE DIA. 2.9"
• 10" KITAGAWA HOLLOW CHUCK UNIT
• TAILSTOCK SPINDLE BUILT-IN CENTER MT4
• AIR GUN
• CHIP CONVEYOR

machine description

This used Five-Axis Mori Seiki CNC Lathe features a 30.7" Swing over bed, a max turning diameter of 14.5" (turret 1), Max turning diameter of 23.6" (turret 2), and a 10" hollow chuck. This Lathe also comes equipped with a12 tool stations on turret 1, and 8 tool stations on turret 2. The machine was new in 2015. For more information call us at 312.226.4150.