Nakamura-Tome WY-100 2014

machine specification

• TURRET CAPACITY
• 8 Positions

• TOOL CHANGER TYPE
• 60 ATC

• THROAT DEPTH
• 9.45"

• TABLE SIZE - W
• 30"

• TABLE SIZE - L
• 61"

• PALLET SIZE (INCHES)
• 25"

• BAR STOCK CAPACITY
• 2.0"

• MAX SWING (INCHES)
• 17.32"

• SPINDLE SPEED
• 12,000 RPM

• SPINDLE TAPER (CAT/BT)
• HSK-463

• Z - AXIS TRAVEL (INCHES)
• 14.7" / 375mm

• Y - AXIS TRAVEL (INCHES)
• 15.7" / 400mm

• X - AXIS TRAVEL (INCHES)
• 15.7" / 400mm

• CHUCK SIZE (INCHES)
• 8"

• MAX TURNING DIAMETER
• 6.89"

• MAX TURNING LENGTH
• 23.15"

• DIST. BETWEEN CENTERS (INCHES)
• 32.28"

• BAR CAPACITY LEFT SPINDLE
• 2.0"

• X-AXIS (X1/X2)
• 5.31"

• Z-AXIS (Z1/Z2/Z3)
• 9.6/9.6/22.75"

• Y-AXIS (+31/-31) (Y1/Y2)
• 2.44"

• B-AXIS
• 24.41"

• LEFT SPINDLE SPEED
• 5,000 RPM

• LEFT SPINDLE NOSE
• A2-5

• LEFT SPINDLE HOLE
• 2.48"

• LEFT SPINDLE ID OF FRONT BEARING
• 3.54"

• LEFT SPINDLE HOLE THROUGH DRAW TUBE
• 2.0"

• RIGHT SPINDLE SPEED
• 6,000 RPM

• RIGHT SPINDLE NOSE
• A2-5

• RIGHT SPINDLE HOLE
• 2.20"

• RIGHT SPINDLE ID OF FRONT BEARING
• 3.15"

• RIGHT SPINDLE HOLE THROUGH DRAW TUBE
• 1.69"

• C-AXIS LEAST INPUT INCREMENT
• 0.001 Degree

• SIMULTANEOUSLY CONTROLLED AXIS
• 3 (X+Z+C) Axis

• UPPER & LOWER TURRET TOOL STATIONS
• 12 Stations (All live capable)

• UPPER & LOWER NUMBER OF INDEX POSITIONS
• 24 Positions

• TOOL SIZE - SQUARE
• 0.79"

• TOOL SIZE - ROUND
• 0.98"

• INDEX TIME - 1 STATION
• 0.2 Sec

• TOOLING CLEARANCE
• 19.09"

• RAPID TRAVERSE X1/X2
• 630 IPM

• RAPID TRAVERSE Z1/Z2/B2
• 1575 IPM

• RAPID TRAVERSE Y1/Y2
• 246 IPM

• CUTTING FEEDRATE X1/X2/Z1/Z2
• 189 IPM

• CUTTING FEEDRATE Y1/Y2
• 189 IPM

• LEFT SPINDLE MOTOR
• 15/10 HP

• RIGHT SPINDLE MOTOR
• 15/10 HP

• ROTATING TOOL SPINDLE MOTOR
• 9.5/3 HP

seller's comments

TMAC MP CONTROLLER SOFTWARE AND MONITOR NOT INCLUDED IN THIS QUOTATION. TMAC SYSTEM AVAILABLE SEPARATELY. INQUIRE.

machine equipped with

• Y-AXIS FUNCTION ON UPPER AND LOWER TURRET
• FULL C-AXIS MILLING UNIT LEFT AND RIGHT SPINDLES
• NT NURSE II SYSTEM
• PARTS CATCHER
• LNS CHIP CONVEYOR
• LNS QUICK LOAD SERVO 80 S2 BARFEED
• TRIPLE ALARM LIGHT
• COOLANT/AIR FLUSH RIGHT SIDE
• AUTO POWER OFF
• MMT CTS 2 PUMP SYSTEM
• ALBERTI (2) CROSS DRILL & (2) FACE DRILLS
• WORKHOLDING LEFT SIDE 2 INCH ATS A5S20 TRUE LENGTH
• WORKHOLDING RIGHT SIDE 41MM ATS TRUE LENGTH A5-16CTLS
• KITAGAWA 6 INCH 3-JAW CHUCK FOR RIGHT SPINDLE (NOT PICTURED)
• MISTBUSTER FLOOR MOUNT 850
• FIRE SUPPRESSION
• LARGE ASSORTMENT OF COLLETS INCLUDED IN SALE
• ALL AVAILABLE BAR LINERS-WORK HOLDING AND ACCESSORIES