Toyoda FA-800S

machine specification

• PALLET DIMENSION
• 800 x 800 mm / 31.5" x 31.5"

• PALLET INDEX TIME
• 0–90° 5.0 s

• PALLET HEIGHT FROM FLOOR
• 1,300 mm / 51.18"

• PALLET CHANGE TIME
• 40.0 s

• MAX LOAD ON PALLET
• 2.500 kg / 5,511 lbs

• X-AXIS STROKE
• 53.14" (Table)

• Y-AXIS STROKE
• 55.11" ( Spindle Head)

• Z-AXIS STROKE
• 45.27" (Column)

• SPINDLE NOSE TO TABLE CENTER
• 200-1,350 mm /7.8" - 53.1"

• SPINDLE NOSE TO PALLET TOP
• 50 -1,200 mm / 1.9" - 47.24"

• WORKPIECE (SWING DIA X HEIGHT)
• 1600 mm x 1300 mm / 62.9" x 51.18"

• MAX SPINDLE SPEED
• 6,000 min-1

• SPINDLE TAPER (BIG PLUS)
• 50

• FRONT BEARING Ø (MM)
• Ø 110 mm

• X/Y/Z BALLSCREW DIAMETER
• 63/50/63 (Ø/mm)

• CUTTING FEEDRATE
• 1- 24,000 mm/min / 1- 944"

• RAPID TRAVERSE RATE
• 24 m/min

• POSITIONING ACCURACY
• ±0.003 mm

• REPEATABILITY
• ±0.0015 mm

• TABLE POSITIONING ACCURACY
• ±2 WS

• TOOL HOLDING CAPACITY CHAIN
• 60

• MAX. TOOL DIMENSIONS
• 120 x 800 (Ø x length) mm

• MAX. TOOL WEIGHT
• 35 kg

• TOOL HOLDING CAPACITY CHAIN
• 60

machine equipped with

• FANUC 31I CONTROL
• NC 4TH AXIS 360000 POSITION ROTARY INDEXING TABLE
• 6000 RPM SUPER-DUTY GEARED HEAD SPINDLE
• HIGH PRESSURE COOLANT THRU SPINDLE (UP TO 1000 PSI)
• RENISHAW OMP60 OPTICAL PROBING SYSTEM WITH SMT INSPECTION SOFTWARE
• HELICAL INTERPOLATION
• TOOL OFFSET MEMORY "C" (GEOMETRY AND WEAR)
• AI PRECISION CONTROL II (REDUCES BLOCK PROCESSING TIME TO 2 MS INCREASES BUFFER TO 200 BLOCKS)
• HIGH SPEED PROCESSOR (REDUCES BLOCK PROCESSING TIME TO .0 MS INCREASES BUFFER TO 600 BLOCKS)
• WORKPIECE COORDINATE SYSTEM - 48 SETS
• EXTENDED CNC PROGRAM MEMORY
• CUSTOM MACRO W/ADDITIONAL COMMON VARIABLES
• INTEGRATED ETHERNET AND MEMORY CARD INPUT/ OUTPUT
• 225 GALLON COOLANT RESEVOIR WITH (2) PUMPS FOR FLOOD COOLANT AND CHIP WASH
• DIRECT TAPPING
• ISOLATED RE-CIRCULATING SUPPLY UNIT
• OVERHEAD COOLANT SHOWER
• INTEGRATED MISTBUSTER 2000 MIST AND SMOKE COLLECTOR

machine description

This large used horizontal mill has a full fourth axis, a 800mm x 800mm pallet size, a 60 ATC, 53.1"X x 45.2"Y x 45.2"Z travels, a 6K rpm Spindle Speed with 60HP, a 1000 psi thru spindle coolant, a CAT 50 Spindle Taper, and a 360 degree B axis travel. This HMC is equipped with a Renishaw OMP60 Optical Probing system with SMT inspection software, Ai precision control II, a high-speed processor,  and direct tapping capabilities. This mill was built in 2009 and installed new in 2011, was kept in a very clean shop, and has been enrolled in a maintenance program since installation. For more information, please call 312.266.4160.