Haas VF-9/40 2010

40+1 Tool Changer Capacity, 30.0 hp Spindle Power, 84" L x 36" Table Size, CT40 Spindle Taper

Make: Haas
Model: VF-9/40
Year: 2010
Control: - Acramatic
Type: Vertical Machining Center
Reference: 3668099

Sell Your Haas

X Axis Travel 84"
Y Axis Travel 40"
Z Axis Travel 30"
Spindle Nose to Table (Max) 34"
Spindle Nose to Table (Min) 4"
Max Rating 30.0 hp
Max Speed 10,000 rpm
Max Torque 90.0 ft-lbf @ 2000 rpm
Spindle Taper BT40
Table Size 84" L x 36" W
T-Slot Width 0.630"
T-Slot Center Distance 4.92"
Number of STD T-Slots 7
Max Weight on Table 4000 lb
Max Cutting Feed Rate 500 ipm
Rapid Feedrate 600 ipm (x,y,z)
Axis Motors Thrust 3400 lbf (x,y,z)
Tool Changer Capacity 40 + 1
Max Tool Diameter 2.5"
Max Tool Diameter (adjacent empty) 6"
Max Tool Length (from gage line) 16"
Max Tool Weight 12 lb
Tool to Tool (avg) 2.8 s
Chip to chip (avg) 3.6 s
Coolant Capacity 95 gal
Air Required 4 scfm @ 100 ps
Inline Air Hose 3/8"
Coupler (Air) 3/8"
Air Pressure Min 80 psi
Approximate Dimensions 214" x 120 " x 129 "
Approx. Machine Weight 25200 lbs
Spindle Speed 10,000 rpm
Drive System Inline Direct-Drive
spindle power 30.0 hp
Input AC Voltage (3 Phase) - Low 220 VAC
Full Load Amps (3 Phase) - Low 70 A
Input AC Voltage (3 Phase) - High 440 VAC
Full Load Amps (3 Phase) - High 35A

Chip Auger
Coolant Tank
Wired for 4th Axis
Includes 24 Tool Holders and 23 Pull Studs

Used Haas VF-9/40. This pre-owned Vertical Machining Center is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Haas Vertical Machining Center we can review machine specifications. To request a quote, inquire about rigging and trucking or to schedule an inspection, contact us today.

DIDN’T FIND WHAT YOU WERE LOOKING FOR?

Tell Us What You Are Looking For...