Item #35Asset #PM10Serial#31804TRAVELSX Axis: 16 " / 406 mm Y Axis: 12 " / 305 mm Z Axis: 10 " / 254 mm Spindle Nose to Table (~ max): 14 " / 356 mm Spindle Nose to Table (~ min): 4 " / 102 mm TABLELength: 36 " / 914 mm Length (Work Area): 28.75 " / 730 mm Width: 12 " / 305 mm T-Slot Width: 5/8 " / 16 mm T-Slot Center Distance : 4.33 " / 110.0 mm Number of Std T-Slots: 3 Max Weight on Table (evenly distributed): 500 lb / 227 kg SPINDLEMax Rating 15 hp / 11.2 kW Max Speed:15 000 rpm Max Torque: 17 ft-lb @ 4600 rpm / 23 Nm @ 4600 rpm Drive System: Direct Speed Belt Drive Taper:CT 40 Bearing Lubrication: Air/Oil Injection Cooling: Air Cooled FEEDRATESRapids on X: 1200 in/min / 30.5 m/min Rapids on Y: 1200 in/min / 30.5 m/min Rapids on Z: 1200 in/min / 30.5 m/min Max Cutting: 833 in/min / 21.2 m/min AXIS MOTORSMax Thrust X: 2000 lb / 8896 N Max Thrust Y: 2000 lb / 8896 N Max Thrust Z: 2000 lb / 8896 N TOOL CHANGERType: Carousel Capacity: 12 Max Tool Diameter (full): 3.5 " / 89 mm Max Tool Weight: 12 lb / 5.4 kg Tool-to-Tool (avg): 3.0 sec Chip-to-Chip (avg): 3.8 sec GENERALAir Required: 4 scfm, 100 psi / 113 L/min, 6.9 bar Coolant Capacity: 24 gal / 91 L 15,000 Spindle RPM4th Axis12-Station ATCHaas Controls