THE SMART WAY TO BUY & SELL MACHINERY

Toyoda FA-800S

Open price not currently available. please Contact Us

Toyoda FA-800S

  • Make: Toyoda

  • Model: FA-800S

  • Year: N/A

  • Control: - Fanuc Series 31

  • Type: Horizontal Machining Center

  • Reference: 3463879

Get Quote Make Offer Contact Us Sell Your Toyoda
  • Pallet Dimension 800 x 800 mm / 31.5" x 31.5"
  • Pallet index time 0–90° 5.0 s
  • Pallet Height from Floor 1,300 mm / 51.18"
  • Pallet Change Time 40.0 s
  • Max Load on Pallet 2.500 kg / 5,511 lbs
  • X-Axis Stroke 53.14" (Table)
  • Y-Axis Stroke 55.11" ( Spindle Head)
  • Z-Axis Stroke 45.27" (Column)
  • Spindle Nose to Table Center 200-1,350 mm /7.8" - 53.1"
  • Spindle Nose to Pallet Top 50 -1,200 mm / 1.9" - 47.24"
  • Workpiece (Swing Dia x Height) 1600 mm x 1300 mm / 62.9" x 51.18"
  • Max Spindle Speed 6,000 min-1
  • Spindle Taper (Big Plus) 50
  • Front bearing Ø (mm) Ø 110 mm
  • X/Y/Z Ballscrew Diameter 63/50/63 (Ø/mm)
  • Cutting Feedrate 1- 24,000 mm/min / 1- 944"
  • Rapid Traverse Rate 24 m/min
  • Positioning Accuracy ±0.003 mm
  • Repeatability ±0.0015 mm
  • Table Positioning Accuracy ±2 WS
  • Tool holding capacity Chain 60
  • Max. tool dimensions 120 x 800 (Ø x length) mm
  • Max. tool weight 35 kg
  • Fanuc 31i Control
  • NC 4th Axis 360000 Position Rotary Indexing Table
  • 6000 RPM Super-Duty Geared Head Spindle
  • High Pressure Coolant Thru Spindle (up to 1000 PSI)
  • Renishaw OMP60 Optical Probing System with SMT Inspection Software
  • Helical Interpolation
  • Tool Offset Memory "C" (Geometry and Wear)
  • AI Precision Control II (reduces block processing time to 2 ms increases buffer to 200 blocks)
  • High Speed Processor (reduces block processing time to .0 ms increases buffer to 600 blocks)
  • Workpiece Coordinate System - 48 Sets
  • Extended CNC Program Memory
  • Custom Macro w/Additional Common Variables
  • Integrated Ethernet and Memory Card Input/ Output
  • 225 Gallon Coolant Resevoir with (2) pumps for Flood Coolant and Chip Wash
  • Direct Tapping
  • Isolated Re-Circulating Supply Unit
  • Overhead Coolant Shower
  • Integrated MistBuster 2000 Mist and Smoke Collector

This large used horizontal mill has a full fourth axis, a 800mm x 800mm pallet size, a 60 ATC, 53.1"X x 45.2"Y x 45.2"Z travels, a 6K rpm Spindle Speed with 60HP, a 1000 psi thru spindle coolant, a CAT 50 Spindle Taper, and a 360 degree B axis travel. This HMC is equipped with a Renishaw OMP60 Optical Probing system with SMT inspection software, Ai precision control II, a high-speed processor,  and direct tapping capabilities. This mill was built in 2009 and installed new in 2011, was kept in a very clean shop, and has been enrolled in a maintenance program since installation. For more information, please call 312.266.4160.

DIDN’T FIND WHAT YOU WERE LOOKING FOR?

Tell Us What You Are Looking For...