Star Technologies Star EVOBend 800-CN3-2P 2021

machine specification

• BENDING CAPACITY
• operating at a minimum radius of 1.5xD

• MILD STEEL ROUND TUBE
• (36 ksi yield) 2.99" x .23"

• SOFT ANNEALED STAINLESS STEEL ROUND TUBE
• (55 ksi yield) 2.99" x .11"

• LIGHT ALLOY ANNEALED ROUND TUBE (AL, CU, ETC)
• 2.99" x .23"

• MILD STEEL SQUARE TUBE CAPACITY
• with crush bend and special collet adaptor 3" x 3" x .11"

• MILD STEEL RECTANGULAR TUBE CAPACITY
• with mandrel and special collet adaptor 2" x 3" x .11"

• MILD STEEL ROUND SOLID BAR
• 2.48"

• MILD STEEL SQUARE SOLID BAR
• 1.96" x 1.96"

• MIN. INSIDE BENDING RADIUS WITH STANDARD SPINDLE
• (O.D. 2.36") 1.57"

• MAX. CLR WITH STANDARD ARMS
• 11"

• MAC CLR WITH SPECIAL EXTENDED ARMS
• 19.6"

• MAX. USEFUL LENGTH OVER MANDREL (*2)
• .15"

• HEAD OVERHANG ( ON BENDING CENTRE)
• 39.3"

• HEAD HEIGHT ( ON BENDING CENTRE-CLEARANCE)
• 15.7"

• HEAD CLEARANCE FROM FLOOR ( ON BENDING CENTRE)
• .03"

• MAX BENDING ANGLE
• 215q

• MAX. BAR PASSAGE INSIDE THE STANDARD P.O.B. POSITIONER
• 3.93" & 7.97" available 3.14"

• CLAMPING ADJUSTABLE STROKE
• 1.57" - 4.33"

• SHOULDERING ADJUSTABLE STROKE
• 1.57"- 4.33"

• MANDREL RETRACTION ADJUSTABLE STROKE
• 1.57"- 3.93"

• MAX. BENDING SPEED ( D.O.B.)
• 46.5q/1"

• MAX SHIFTING SPEED ( D.B.B.)
• 15.7"

• MAX. ROTATION SPEED (P.O.B.)
• 76q per second

• A.O.B. REPEATABILITY- AXIS Y
• +/- 0.1q

• D.B.B. REPEATABILITY- AXIS X
• +/-0.1mm

• P.O.B. REPEATABILITY – AXIS Z
• +/-0.1q

• MAX PRODUCTIVITY
• ( 90q bends) 350 cycles/hour

• MAX. ABSORBED ELECTRICAL POWER
• 23.5kW

• HYDRAULIC OIL TANK CAPACITY
• 80 litres

• MACHINE OVERALL DIMENSIONS ( CLOSED ARM)
• 216.5" x 51.1" x 43.3"

• CONTROL UNIT OVERALL DIMENSIONS
• 39.3" x 27.5" x 66.9"

• NET WEIGHT ( MACHINE + CONTROL UNIT)
• 13,668 lbs

• NOISE
• ( leq.A) 75dB

machine equipped with

• 800 AMP (L) MACHINE BED EXTENSION FROM 4M TO 6M
• TWO STACK OPTION - UPGRADED SINGLE STACK MACHINE TO TWO STACK MACHINE WITH PNEUMATIC TAIL STOCK SHIFITNG CAPABILITIES THAT WILL ALLOW COMBINATION ROTARY DRAW COMPRESSION AND INTERPOLATION BENDING ONTO ONE PART.
• MACHINE MODIFICATIONS FOR SIDE SHIFT OF POSITIONER FOR BENDING NON ROUND PROFILE: (HAND WHEEL FOR CLR ADJUSTMENTS)
• INCREASED X AXIS COLLET BOOST AND PUSH BEND CAPACITY WHICH IS VERY HELPFUL FOR TIGHT RADIUS ROTARY DRAW BENDING OF LOW ELONGATION MATERIALS OR FOR PUSH BENDING TIGHTER RADIUS AND TOUGHER MATERIALS
• SINGLE SEAT USER LICENSE OF OUR TUBEWORKS ADVANCED TUBE PROCESSING SOFTWARE STAND-ALONE APPLICATION
• KEYENCE LASER SCANNER WITH PRE PROGRAMMED SAFETY AREA TO GUARD THE FRONT AND TWO SIDES OF THE BEND HEAD AREA IN THE MOST USEFUL WAY INCLUDING THE SAFETY LOGIC INTEGRATION AND PROGRAMMING OF THE PLC
• ONE FOLLOWING BLOCK/PRESSURE DIE HOLDER COMPLETE WITH HYDRAULIC CYLINDER AND LINEAR ROLLER BEARINGS
• BA80 MASTER COLLET
• ONE COMPLETE SET OF 1.25” OD ROUND X .120” WALL BEND TOOLS WITH THE CAPABILITY TO BEND UP TO 120 DEGREES
• HEXAGON 7-AXIS MODEL 8535 ABSOLUTE MEASURING ARM ACCESSORIES & SOFTWARE FOR SCANNING AND REVERSE ENGINEERING TUBULAR PRODUCTS BUNDLE
• HEXAGON – “INSPIRE” GENERAL METROLOGY SCANNING SOFTWARE (SINGLE USER LICENSE)

machine description

Used Star Technologies Star EVOBend 800-CN3-2P. This pre-owned Tube Benders is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Star Technologies Tube Benders we can review machine specifications. To request a quote, inquire about rigging and trucking or to schedule an inspection, contact us today.