Peddinghaus 623-K Anglemaster 1994

MACHINE SPECIFICATIONS

• Minimum gauges:

  272 punches, 271 dies (maximum diameter 1.25")

• Punching Capacity:

  All punches 66 Tons

• Full Stroke of Press Ram:

  1.50"

• Angle leg sizes:

  1.5" x 1.5" through 2" x 2" is 11/16" to the inside of leg

• Hydraulic System:

  25 HP powering a 40 GPM pump at 1500 RPM

• Angle leg sizes:

  2.5" x 2.5" is 1 3/16" to the inside of leg

• Angle leg sizes:

  3" through 6" is 1.25" to the inside of leg

• Maximum Angle Structural :

  6 x 6 x 1/2" Thick

• Minimum Angle Structural :

  3 x 2 x 1/4" Thick

• Maximum Angle Bar Size:

  2.5 x 2.5 x 1/2" Thick

• Minimum Angle Bar Size :

  1.5 x 1.5 x 1/8" Thick

• Maximum Angle HSLA :

  6 x 6 x 1/2" Thick

• Minimum Angle HSLA :

  1.5 x 1.5 x 3/16" Thick

• Maximum Flat: :

  6 x 1/2" Thick

• Minimum Flat:

  3 x 1/4" Thick

• Hydraulic PSI:

  3000 psi

• Shear Tonnage:

  200 Tons

• Punching Parameters:

  max shear strength of 60000 psi

• Standard Punch Sizes:

  1.25" Diameter

• Punch Positioning :

  3.25" bore hydraulic cylinder

• Punching Accuracy:

  1/16"

• Infeed Speed:

  150 FPM

• Typical Punch Cycle:

  1.75 sec

• Typical Shear Cycle :

  3.5 sec