Name: Doosan Lynx 300 2011
Brand: Doosan
Availability: OutOfStock

Doosan Lynx 300 2011

MAKE: Doosan
YEAR: 2011
TYPE: N/A

MODEL: Lynx 300
CONTROL: Fanuc OiTD
REF #:

Buy Similar / Same Machine

View available similar machines

machine specifications

Chuck Size (Inches):

Max Swing (inches):

17.32"

X - Axis Travel (inches):

15.7" / 400mm

Y - Axis Travel (inches):

15.7" / 400mm

Z - Axis Travel (inches):

14.7" / 375mm

machine equipped with

Powerful (15kW) 20 HP high torquespindle drive

Large (76mm) 3 in ? bar capacity

Part catcher

High speed 3

500 RPM spindle

Heavy duty turret with (210mm) 8.26 in ?Curvic coupling

Separate coolant tank

Fast 0.15 second turret indexing

One-p

machine description

Swing over bed (651mm) 25.63"Swing over carriage (461mm) 18.15"Maximum turning diameter (Lynx 300 / Lynx 300M) (450mm / 370mm) 17.7” / 14.56”Maximum turning length (Lynx 300 / Lynx 300M) (765mm / 712mm) 30.1” / 28.03”SPINDLE: Spindle speed (RPM) 35 - 3,500Spindle nose A2-8Draw tube I.D. (77mm) 3.03"Spindle bore diameter (86mm) 3.38"A.C. Spindle Motor (30 minute rating) (15kW) 20 HPMaximum spindle torque (30 minute rating) (327.4 Nm) 241 ft-lbs.C-AXIS: (Lynx 300M only)Minimum programmable angle (degrees) .001Rapid traverse rate (RPM) 200C-axis repeatability +/- .006 deg.C-axis positioning accuracy .0167 deg.BED, SADDLE, & CROSS SLIDE:X axis travel (255mm) 10.0”Z axis travel (790mm) 31.1"Inclined angle of bed 30 degreesX axis guideway span (264mm) 10.39”Z axis guideway span (373mm) 14.68"Tailstock guideway span (148mm) 5.8”X axis rapid traverse rate (24m/min) 945 IPMZ axis rapid traverse rate (30m/min) 1,181 IPMX axis ball screw diameter (28mm) 1.1"Z axis ball screw diameter (40mm) 1.57”X axis feed thrust (continuous/intermittent) (5814N / 8721N) 1,307 / 1,960 lbsZ axis feed thrust (continuous/intermittent) (4651N / 6976N) 1,045 / 1,568 lbsX axis repeatability (+.002) + 0.00008"Z axis repeatability (+ .003) + 0.00012"TURRET:Number of tools 12Turning tool shank size (metric turret 25mm) 1.0"Boring bar diameter (metric turret 40mm) 1.5"Turret index time (next station swivel time) 0.15 sec.Tool selection Bi-directionalCurvic coupling diameter (210mm) 8.26"Turret clamping force (45.8kN) 10,296 lbsTurret index repeatability + .0005 degreeTailstock quill diameter (80mm) 3.15"Tailstock quill stroke (programmable) (120mm) 4.72"Maximum tailstock quill thrust / maximum hydraulic pressure (7.7kN / 40bar) 1732 lbs. / 580 PSITailstock spindle taper MT #4COOLANT SYSTEM: Coolant pump pressure (4.5bar) 65 PSICoolant pump motor (.9kW) 1.2 HPCoolant tank capacity (160 L) 42 gal.HYDRAULIC / LUBRICATION:Hydraulic tank capacity (14 L) 3.7 gal.Hydraulic oil required (or equivalent) Mobil DTE 24 or Shell Tellus 32Way lubrication tank capacity (2 L) 0.5 gal.Way Lubrication oil required (or equivalent) Mobil Vactra #2 or Shell Tonna T68GENERAL:Height from floor to spindle center (1069mm) 42.0” Floor space - Length X Width (2993mm x 1785mm) 118” x 70"Machine height (1715mm) 67.5”Machine weight (Lynx 300 / Lynx 300M) (4000 / 4050kg) 8,818 / 8,930 lbsVoltage required 205 - 235 volt / 3 phasePower requirement (Lynx 300) 31 KVA (81 amps @ 220 volts)Power requirement (Lynx 300M) 33 KVA (87 amps @ 220 volts)

Doosan Lynx 300 2011

Loading highlight...

MAKE: Doosan

YEAR: 2011

TYPE: N/A

MODEL: Lynx 300

CONTROL: Fanuc OiTD