Doosan Puma 400C 2012

CAPACITY:Swing over bed:30.3"Swing over carriage:23.2”Distance between centers :44.7”Maximum turning diameter:21.7"Maximum turning length:40" SPINDLE:Spindle speed:15 - 1,500 RPMSpindle nose: ASA-A1-15Draw tube ID :6.55"Spindle bore diameter:7.12"AC Spindle Motor (30 min. rating):50 HPSpindle speed ranges: 2Maximum spindle torque (30 min. rating):2,419 ft-lbs. BED, SADDLE, & CROSS SLIDE:X axis travel:14.3”Z axis travel:43.5”Angle of slant bed:45 degreesX axis guideway span:14.2"Z axis guideway span:16.5"Tailstock guideway span:11.8”X axis rapid traverse rate:630 IPMZ axis rapid traverse rate:790 IPMX axis ball screw diameter: 1.6"Z axis ball screw diameter:2.0"X axis feed thrust (continuous/intermittent) (15517 / 23275 N) 3,488 / 5,232 lbs.Z axis feed thrust: (21502 / 32253 N) 4,833 / 7,250 lbs. X axis repeatability:0.00008"Z axis repeatability:0.00012"TURRET:Number of tools:12Turning tool shank size: 1.25"Boring bar Diameter: 2.5"Turret index time (next station swivel time) : 0.25 secTool Selection: Bi-directionalCurvic coupling diameter: 12.6"Turret clamping force: 23,600 lbs.Turret head thickness: 4.96"Turret index repeatability: + - .0005 degreeTailstock:Tailstock quill diameter: 4.7"Tailstock quill stroke (programmable): 4.7"Maximum tailstock quill thrust / maximum hydraulic pressure: 580 PSITailstock body stroke (programmable): 39.4"Tailstock spindle taper (built-in type): 2MT #5Coolant System:Coolant pump pressure:(4.5 bar) 65 PSICoolant pump motor:1.2 HPCoolant tank capacity: 74 gal.HYDRAULIC / LUBRICATION:Hydraulic tank capacity: 3.6 gal.Hydraulic oil required: Mobil DTE 24 or Shell Tellus 32Way lubrication tank capacity: 0.5 gal.Way Lubrication oil required: Mobil Vactra #2 or Shell Tonna T68General:Floor space (length X width):166” x 94”Net weight :22,150 lbs.Voltage required:205-235 Volts / 3 phase**Power requirement:(140 Amps @ 220 Volts)