Nakamura Tome WY 250 2009

8000 Power on HoursMachine dimension with chip conveyor length - 4,905 mm 193.11"width - 3,331mm 131.14"height - 2,395 mm 94.3"Machine weight approx. 12,000 Kg. 26,400 lbsNoise level measured at 1.2M high from floor and 1.0M aside from machine CAPACITY/ MAIN SPINDLERound collet capacity 65 mm 2.56"Chuck dia. 200 mm 8"Turning dia. max. 225 mm 8.86"Turning dia. max. (standard) 150 mm 5.91"Turning length max. 580 mm 22.83"MAIN SPINDLEDrive motor wider output range main spindle motor continuous/30 min. rating AC. 15/18.5 kw 20/25 H.P.Speed range 45-4500 rpmconstant output (Max) From 568 to 3400 rpmconstant torque 45- 785 rpmNumber of steps steplessDesiimation rpm direct designationSpindle nose A2-6Hole through spindle 80 mm 3.15"Hole through draw tube 66 mm 2.6"Front bearing inner dia. 110 mm 4.33"Max. torque at spindle 225 Nm. 165 ft.lbsCenter height from floor 1275 mm 47.24" UPPER TURRET LOWER TURRETConfi£Uration 60 degree angled bedFeed motors X Axis 2.5 Kw 3.4 hp) 2.5 Kw (3.4 hp)Z Axis 4.5 Kw 6.0 hp) 4.5 Kw (6.0 hp)Y Axis 2.5 Kw 3.4 hp) 1.5 Kw (2.0 hp)Ballscrews (dia. x pitch) X Axis 36 x 10 mm (1.42" x 0.39") 40 x 10 mm (1.57" x 0.39")Z Axis 32 x 12 mm (1.26" x 0.47'') 32 x 12 mm (1.26" x 0.39")Y-Axis 36 x 10 mm (1.42" x 0.39") 36 x 8 mm (1.42" x 0.315")Effective slide travel X Axis 160.5 mm (6.32") 165 mm (6.50")Z Axis 580 mm (22.91") 580 mm (22.91")Y Axis +/- 50 mm (1.97") - 50 (1.97") to + 20 (0.79")Rapid Traverse X Axis 18m/min. (709ipm) 18m/min (709ipm) Z Axis 36m/ min. (1417ipm) 36m/ min (1417ipm , Y Axis lOm/ min. (394 ipm) lOm/ min. (394 ipm Thrust force X Axis 612 Kg (1,346 lbs.) 612 Kg (1,346 lbs.)Z Axis 832 Kg (1,830 lbs.) 832 Kg (1,830 lbs.)Y Axis 433 Kg (953 lbs.) 433 Kg (953 lbs.)Cutting Feedrate (X, Z, Y, B axis) 1- 4,800 mm/ min. 0.04 -190 IPMJog Feedrate (X, Z, Y, B Axis) 1- 1,260 mm/ min. 0.04 - 50 IPM TURRET UPPER TURRET LOWER TURRET MILLING TURRET FUNCTION