Okuma MH800 1995

Travel: X: 49.21" / 1,270mm (Actual X-Axis is 49.2914 or 49.21) Y: 39.37" / 1,016mm Z: 33.46" / 850mm Spindle Center to table (pallet) upper surface: 1.97" to 41.34" Spindle end to table (pallet) center: 9.84" to 43.31" Table (pallet) size: 31.50" X 31.50" Table Max. Load Capacity: 3520 lbf Table Index Positions: Standard: 72 positions, (5° increments, direct command) Optional: 360 positions (1° increments, direct command) Optional: 360000 positions (0.001° increments, direct command) SPINDLE Speed Range: 2,400 to 24,000, 2 Speeds, Tper Hole NT No. 50 Spindle diameter (at front bearing): 4.33 inches FEEDRATE: Rapid: X-/Y-AXIS 787.40 ipm Cutting: 0.01 - 393.70 ipm ATC: Tool Shank System: MAS BT50 Pull-Stud Bolt Type: MAS Type 2 Tool Magazine Capacity: 40 tools standard, (70/100/120 optional) Max tool diameter: 5.31 with adjacent tools, 9.06 withpout Max tool length: 21.65" Max tool weight: 44 lbf, 55 lbf optional Tool Selection: Fixed address random MOTOR: Spindle drive: 30 hp min/cont. X-axis feed: 6.4 hp Y-axis feed: 6.4 hp X-axis feed 6.4 hp Hydrolic Power Unit: 7 hp Table Indexing: Standard AC 2.0 hp (1°/5° index) Optional AC 6.4 hp (NC rotary table) Magazine indexing (40-tool ATC): 1.6 hp servomotor APC drive (parallel type 2-pallet): AC 3.2 hp servomotor Machine Height: 138.98" Floor Space: 255.51" Machine Weight: (including CNC, 40-tool ATC, 2-pallet APC): 50,600 lbf------------------------------------------------------------------------------------------Power: 30hp / 22.4kW RPM: 2400 - 24,000 rpm # ATC: 120 Pallet-W: 31.500 " / 800.1 mm Pallet-L: 31.500 " / 800.1 mm Max Load 3520 (lbf) CNC Control: Yes 360,000 Positions 0.001 increments, direct command Machine was used to cut ALUMINUM