Rusch 350 Baleigh 2007

This is a programmable bender3" .180 Wall - 2.5" schedule 40 Capacity , .75, .875, 1.0, 1.25, 1.5, 2.0 Tubing Dies , .5, .75, 1.0, 1.25, 1.5, 2.0 Pipe Dies , 10 foot index table, Operator's Manual, Only 4 or 5 dies ever used, machine has less than 100 bends through it only operated by owner, Currently Wired for 220 v 3 phase, can be converted to 460 v 3-phase as well as 575 v 3-phase, Dies, Bender, Index Table approximately 2000 lbs.The OCS (Operator Control Station) allows for quick, accurate repeatability of multiple or single bends. Unit can store up to 20 programs with 10 bends per program. The OCS unit is extremely easy to program. , Extra heavy duty design normally seen on larger models of bending machines means more value for the investment. , Quick release counter die system allows for maximum efficiencies for high production runs. , Maximum bend is 180 degrees (plus spring back up to 206 degrees). , The model 350 tubing bender has a maximum bend speed of 6 seconds at 180 degrees. , This tubing bender has a larger CLR than almost all other bending equipment on the market. The maximum CLR is 24 inch. , Power is 240 V, 3 phase, 60 Hertz, 30 amp , Weight is approximately 1200 lbs (solid steel construction) , Similar to other RMD programmable tubing benders, the model 350 can be fitted with a rotary positioning table allowing for accurate bends in varying planes, as well as consistent measurements between bends