SAMECA MUZ12.65 1994

Lead source: Craigslist.He emailed me the following information in regards to his Sameca bar feeder:The machine that this was mated to was sold, being replaced by a much larger machine. The buyer of the old machine was not interested in the bar feeder. It was not used by us on a regular basis. I’m going to relist it on Ebay and see what happens. Asking price: $3000.00SMW UNIVERSAL BAR FEEDER MANUFACTURED IN SWITZERLAND BY SAMECA SA AND DISTRIBUTED IN THE USA BY SMW SYSTEMS.IN GOOD WORKING CONDITION. DATE OF MANUFACTURE IS DECEMBER OF 1994. TYPE IS MUZ12.65. SERIAL # 4/635. COMES WITH 3 PUSH-RODS, 2 CRADLES AND INSTALLATION / OPERATION & MAINTENANCE MANUAL.WAS LAST USED WITH A HARDINGE CONQUEST 42 BUT CAN BE MATED TO MOST ANY CNC LATHE.WILL ACCEPT ROUND BARS 12 TO 65MM DIAMETER (.472" TO 2.559"); HEX STOCK 13 TO 56 MM ACROSS FLATS (.512" TO 2.205") AND SQUARE BARS 10 TO 46 MM SQUARE (.394 TO 1.811"). ACCOMADATES BAR LENGTHS UP TO 1200 MM (48").MATERIAL RACK CAPACITY IS 13 BARS AT Ø65 MM (Ø2.5559"), 22 BARS AT Ø40 MM (Ø1.575") AND 35 BARS AT Ø25 MM (Ø.984").MATERIAL ADVANCEMENT IS BY PNEUMATIC PUSHER, ADJUSTABLE FEEDING SPEED.NO BAR END POINTING IS REQUIRED, A DEBURR IS ENOUGH.AUTOMATIC RELOAD CYCLE IS ABOUT 30 SECONDS.PROGRAMMABLE LOGIC CONTROLLER DRIVEN BY 24VDCPOWER SUPPLY 200-575 V 50/60 Hz MAX 2 AMP4 TO 10 BARS (60 TO 145 PSI) COMPRESSED AIR CONNECTION REQUIRED. THE MAGAZINE BAR FEED IS EQUIPPED WITH A PRESSURE REGULATOR AND AN AIR DRYER/OILER DEVICE.UNIT WEIGHS APPROXIMATELY 900 POUNDS AND IS 93" LONG X 48" DEEP X 54" HIGH.WE WILL LOAD IT ON YOUR TRUCK WITH OUR FORKLIFT.BUYER WILL BE RESPONSIBLE FOR ALL SHIPPING ARRAGEMENTS.