Kingston 2007

Swing over Bed (in.) 26Swing over Cross Slide (in.) 17-1/2Swing in Gap (in.) 35-1/8Gap Width (in.) 10-5/8Distance between Centers (in.) 120Floor Surface to Spindle Center Height (in.) 44-5/16Bed Width (in.) 15-3/4Spindle Bore (in.) 4-1/16Spindle Nose D1-11Spindle Taper (with Sleeve) MT-7 (MT-5)Number of Spindle Speeds 12Range of Spindle Speeds (RPM) 13, 20, 30, 47,70, 105, 150, 230,340, 530, 800, 1,200Number of Longitudinal Feeds 16Range of Longitudinal Feeds (in./rev.) 0.0024 - 0.039Number of Cross Feeds 16Range of Cross Feeds (in./rev.) 0.0008 - 0.013Number of Inch Threads 44Range of Inch Threads (T.P.I.) 1 - 36Number of Metric Threads 39Range of Metric Threads (mm) 0.2 - 14Compound Slide Travel (max./in.) 9-17/32Cross Slide Travel (max./in.) 15-3/4Tailstock Quill Travel (max./in.) 7Tailstock Quill Diameter (in.) 2-15/16Tailstock Quill Taper MT-5Tailstock Feed Rate 1:1/1:1/4Leadscrew Diameter (in.) 1-3/4Leadscrew Thread Pitch (T.P.I.) 2Main Drive Motor 15 HP,220V/440V/3 Phase/60 Hz.,Prewired 220VCoolant Pump Motor 1/4 HPFloor Space Dimensions (in./L x W x H) 177 x 47 x 59Net Weight (lbs.) 7,000 STANDARD ACCESSORIES, 1.60" - 10" Capacity Steady Rest with Roller Jaws, 12" Back Plate, 4-Way Tool Post, Automatic Longitudinal Feed Stop Bar, Thread Chasing Dial, Halogen Work Light, Longitudinal Rapid Traverse, Foot Brake System, Coolant System with Pump and Piping, Full Length Splash Guard, Tool Box with Tools OPTIONAL ACCESSORIES - 12" 3-Jaw Chuck, 16" 3-Jaw Chuck, 20" 3-Jaw Chuck, 16" 4-Jaw Chuck, 20" 4-Jaw Chuck, 25" 4-Jaw Chuck, 7.50" - 15" Capacity Steady Rest with Roller Jaws, 7" Follow Rest, 20" Face Plate, Turret Carriage Stop, Chuck Guard, Telescopic Taper Turning Attachment with Installation, 5C Round Collet Set, 5C Lever Type Collet Closer with Installation, Quick Change Tool Post and Holders Set, Digital Readout System with Installation,