machine description
X-Travel: 25.2"Y-Travel: 24.02"Z-Travel: 26.77"Horspower AC 30/20RPMs: 12000Fanuc 16iATC: # of Tools: 120 Spindle Norse: CAT-40(BIG)Boring Bar Diameter: Accessories TOOL LENTH MEASUREMENT Accessories COOLANT THROUGH SPINDLEAccessories 4 AXISTRAVEL X-axis, Y-axis, Z-axis mm [inch] 640 [25.2"], 610 [24.0"], 680 [26.8"]Spindle center to pallet surface mm [inch] 50 - 660 [2.0" - 26.0"]Spindle nose to pallet center mm [inch] 100 - 780 [3.9" - 30.7"]Pallet top height (from the floor) mm [inch] 1,069 [42.1"]TABLE Table size (x 2pallets) mm [inch] 400 x 400 [15.7" x 15.7"],Optional 500 x 500 [19.7" x 19.7"]Workpiece max. size mm [inch] ?750 x 1,000 [29.5"x 39.4"] for 2APC?750 x 900 [29.5"x 35.4"] for 6APC?650 x 900 [25.6"x 35.4"] for 8APCMax. load kg [lbs] 500 [1,100]Configuration 25-M16 P=80mm [3.1"](P=100mm [3.9"] for 500mm pallet)Min. indexing degree degree 0.001Indexing speed sec. / 90 degrees 1.1Pallet clamping system Mechanical LockPallet clamping force kN 9.8 x 4 conesB-axis clamping torque Nm 5,000SPINDLE Spindle speed min-1 12,000 direct drive, Optional 15,000 direct driveSpindle rated torque Nm 200 (2min.) / 150 (15min.)Spindle taper ISO 7/24 Taper NT No. 40Through spindle coolant MPa [psi] 7.0 [1,000]FEED Rapid feed (X/Y/Z) mm/min [ipm] 60,000 [2,362]Cutting feed (X/Y/Z) mm/min [ipm] 30,000 [1,181]Table rotating speed min-1 33.3Acceleration (X/Y/Z) G 1.0 / 1.0 / 1.0ATC Type of tool shank BT40/CAT40Type of pull-stud JISNumber of tools 60, Optional 120 / 220Max. tool diameter mm [inch] ?70 [2.8"] / ?140 [5.5"] for 60ATC(Adjacent pots full / empty) ?95 [3.7"] / ?185 [7.2"] for 120 / 220ATCMax. tool length mm [inch] 400 [15.7"], Optional 450 [17.7"]Max. tool weight kg [lbs] 8 [17.6]Tool selection system Random for 60ATCRandom / Fixed tool pot for 120 / 220ATCTool to tool sec. 0.9 (1.7: Heavy tool programmable)Chip to chip sec. 2.8 (3.6: Heavy tool programmable)Pallet change system RotationAPC exchange time sec. 7MOTOR Spindle motor kW [HP] 22 / 15 [30 / 20]Feed axes motors (X/Y/Z/B) kW [HP] 4.5 / 4.5 / 4.5 / 2.7 [6.0 / 6.0 / 6.0 / 3.6]Lubrication pump motor W [HP] 23 [0.03]Coolant pumps W [HP] 600 [0.8] x 3pcHydraulic pump kW [HP] 2.2 [2.9]SUPPLY Electric voltage V / 50 or 60Hz 200-230Electric power supply KVA 50Air pressure Mpa [psi] 0.4 [58]Air volume liters [gal] /min. 360 [95]TANK Hydraulic unit tank liters [gal] 20 [5.3]Coolant tank liters [gal] 550 [145.3]Lubrication unit tank liters [gal] 1.8 [0.5]SIZE Floor size mm [inch] 2APC+60ATC: 2,398 x 4,539 [94.4" x 178.7"]2APC+120ATC: 2,541 x 4,539 [100.0" x 178.7"]Machine height mm [inch] 60ATC: 2,766 [108.9"]120ATC: 2,584 [101.7"]Machine weight kg [lbs] 2APC+60ATC: 9,200 [20,240]2APC+120ATC: 9,950 [21,890]
ES
