Omax Fabricator 2007

Note - Hours are incorrect on the counter - Actual hours are 14,20040HP , 55000 PSITilt-A-Jet X-Y table with Motorized Z-Axis.Rapid water level control for submerged cuttingSingle OMAX MAXJET® 5 Nozzle - Assembly including all necessary high-pressure plumbing.OMAX patented motion control system incorporating Windows® XP software.600 lb. abrasive hopper.Black anodized aluminum covers for X-Axis components.Ultra-high pressure direct drive pump.Table cutting length expandable by two meter increments.Traction drive coupled with position feedback from a linear scale results in high precision.Work Envelope:Y Travel 80" (2032 mm)X Travel 168" (4267 mm)Expandable Contact local Distributor for detailsTable Size 174" x 91" (4419 mm x 2311 mm)Material Support Slats 4" x 1/8" Galvanized SteelMaximum Supported - Material Load 250 lbs/sq. ft. (1,200 kg/sq. meter)Computer Control SystemHardware Personal computerControl Software Integrated CAD/CAM system directly uses .DXF filesDrive Description:Closed loop, digital drives, Brushless servo motors, Pre-loaded ballscrews with recirculating ball bearings and hardened precision ground ways in Y-AxisAccuracy of Motion at 70° FBall Bar Circularity (Over 12?)At Cutting Speed ±0.005" (±0.13 mm)Repeatability ±0.005" (±0.13 mm)Speed:180 inches per minute standard (Speed can be increased if desired.)Electrical Requirements3-Phase, 380-480 VAC ±10%, 50-60 HzMachine Dimensions:Footprint 243" x 134" (6170 mm x 3405 mm)Footprint with optional SRS 288" x 134" (7315 mm x 3405 mm)Weight (tank empty) 10,000 lbs (4500 kg)Height 144" (3660 mm)Operating Weight 35,000 lbs (15900 kg)Machine is $280,000 new.