Haas VF-2 1995

machine specification

• TABLE SIZE - W
• 30"

• TABLE SIZE - L
• 61"

• SPINDLE MOTOR (HP)
• 20 HP Vector Dual Drive

• SPINDLE SPEED
• 12,000 RPM

• SPINDLE TAPER (CAT/BT)
• HSK-463

• Z - AXIS TRAVEL (INCHES)
• 14.7" / 375mm

• Y - AXIS TRAVEL (INCHES)
• 15.7" / 400mm

• X - AXIS TRAVEL (INCHES)
• 15.7" / 400mm

• TURRET CAPACITY
• 8 Positions

• TOOL CHANGER TYPE
• 60 ATC

• THROAT DEPTH
• 9.45"

• PALLET SIZE (INCHES)
• 25"

• BAR STOCK CAPACITY
• 2.0"

• MAX SWING (INCHES)
• 17.32"

• CHUCK SIZE (INCHES)
• 8"

• RAPID TRAVERSE RATES
• 710 IPM

• CUTTING FEED RATES
• 500 IPM

• NUMBER OF STD T-SLOTS
• 3

• T-SLOT WIDTH
• 5/8?

• MAX WEIGHT ON TABLE
• 1500 lbs

• MAX TORQUE
• 90ft-lb @ 2000 RPM

• SPINDLE NOSE TO TABLE (MIN.- MAX.):
• 4" – 24"

• MAX TOOL WEIGHT:
• 12 lbs

• MAX TOOL DIA
• 3.6?

• MAX TOOL LENGTH
• 13?

• TOOL CHANGING TIME
• 3.2 Sec

• AIR REQUIRED
• 100 psi, 4 scfm

• POWER
• 220v / 66FLA / 3-Phase

machine equipped with

• RIGID TAP
• 4TH AXIS READY

machine description

This Haas VF2 vertical machining center features a rigid tap, a 14"W x 36"L table size, 20 HP vector dual drive spindle motor, a spindle speed of 7500 RPM, a 40 spindle taper, 20" Z-Axis x 16" Y-Axis x 30" X-Axis Travel, a 710 IPM rapid traverse rate, a 710 cutting feed rate, a 500 IPM cutting feed rate, a number of STD T Slots, 5/8 T Slot width,90 Ft-Lb at 2000 RPM Max Torque, a 3.6 max tool diameter, a 13" max tool length, and a 3.2 sec tool changing time. It's 4th Axis ready and has 220V 3 Phase Power.