Haas VF-9/40 2010

MACHINE SPECIFICATIONS

• X Axis Travel:

  84"

• Y Axis Travel:

  40"

• Z Axis Travel:

  30"

• Spindle Nose to Table (Max):

  34"

• Spindle Nose to Table (Min):

  4"

• Max Rating:

  30.0 hp

• Max Speed:

  10,000 rpm

• Max Torque:

  90.0 ft-lbf @ 2000 rpm

• Spindle Taper:

  BT40

• Table Size:

  84" L x 36" W

• T-Slot Width:

  0.630"

• T-Slot Center Distance:

  4.92"

• Number of STD T-Slots:

  7

• Max Weight on Table:

  4000 lb

• Max Cutting Feed Rate:

  500 ipm

• Rapid Feedrate:

  600 ipm (x,y,z)

• Axis Motors:

  Thrust 3400 lbf (x,y,z)

• Tool Changer Capacity:

  40 + 1

• Max Tool Diameter:

  2.5"

• Max Tool Diameter (adjacent empty):

  6"

• Max Tool Length (from gage line):

  16"

• Max Tool Weight:

  12 lb

• Tool to Tool (avg):

  2.8 s

• Chip to chip (avg):

  3.6 s

• Coolant Capacity:

  95 gal

• Air Required:

  4 scfm @ 100 ps

• Inline Air Hose:

  3/8"

• Coupler (Air):

  3/8"

• Air Pressure Min:

  80 psi

• Approximate Dimensions:

  214" x 120 " x 129 "

• Approx. Machine Weight:

  25200 lbs

• Spindle Speed:

  10,000 rpm

• Drive System:

  Inline Direct-Drive

• spindle power:

  30.0 hp

• Input AC Voltage (3 Phase) - Low:

  220 VAC

• Full Load Amps (3 Phase) - Low:

  70 A

• Input AC Voltage (3 Phase) - High:

  440 VAC

• Full Load Amps (3 Phase) - High:

  35A